Description:
Name: Valve Core Remover Installer Tool
Wide Application: Suitable for all refrigeration equipment, dual size( SAE 1/4'' & 5/16'' Port) design makes the valve core remover installer tool be compatible with R22, R12, R407, R410, R404, R32 A/ C air condition system, etc.
Great Design: Durable, solid brass tool has a ball valve that can be opened and closed in just a quarter-turn. (No Gas Loss). Anti-slip design increase hand friction, prevent all kinds of overpowered valves; High-quality craftsmanship probes, rugged and durable, suitable for most equipments.
Package Included: 1* Valve Core Remover, 1 *R410 R32 Brass Adapter, 20* Valve Cores, 10* brass nuts.
Valve Core Remover Installer Tool with Dual Size SAE 1/4 & 5/16 Port, 20 PCS Valve Cores with Teflon Seal and 10 PCS Brass Nuts
Suitable for all refrigeration equipment, dual size( SAE 1/4'' & 5/16'' Port) design makes the valve core remover installer tool be compatible with R22, R12, R407, R410, R404, R32 A/C air condition system, etc
Valve core removal wrench basic operation:
1.Pull out the dead point on the stem, close the valve on the tool, adjust the joint of the tool to the air conditioning interface, and tighten the valve on the air conditioning.
2.Make sure that the tool is connected tightly to the air conditioning valve, then open the valve on the tool. Push the stem into the air conditioning valve and gently rotate the tail knob of the remover. Find the angle to connect the valve core , and then loosen it.
3.When the valve core is removed, pull out the stem, close the valve on the valve remover, loosen the screw at the end of the tool and take out the valve core. The work is done!
Packing list:
1 * Valve Core Remover
1 * R410 R32 Brass Adapter
20 * Valve Cores
10 * brass nuts
Note:
We suggest that before removing the valve core, close the valve core wrench valve and disconnect the air conditioner internal connection.