Name: Rear Windshield LED Third High Mounted Brake Light Tail Light
Voltage: DC12V
Light source: LED
color: red
Length: Approx. 103 cm / 40.6 inches
Accessories: Fits all most cars
Waterproof: Yes, IP68
Function: Brake+DRL Running Lights+Turn Signals; With Flash, Flow Mode
Wiring connection:
Red wire - ACC V+
Black wire -VCC V-
Yellow line/L- turn left V+
Yellow line/R- turn right V+
White Line Brake V+
Green line width light V+
How to install:
1. Use detergent or alcohol to clean the surface of the target area before sticking.
2. Heat the tape slightly with a hair dryer.
3. Stick it, don't wash the car. Optimum adhesion is achieved within 48 hours.
4. Try to complete the steps at once, do not peel from one area and stick to another to avoid poor adhesion.
Packing list:
1 x Rear Windshield LED Third High Mounted Brake Light Tail Light
Note:
1. Due to manual measurement, please allow 1-3cm error. Make sure you don't mind before bidding.
2. Due to the difference of different monitors, the picture may not reflect the actual color of the product. Thanks.
