Feature:
1. Note: This Dent Puller product does not include glue handle and glue sticks; we recommend users to buy hot melt glue handle and hot melt glue sticks to use it. Also, it is effective on thin metal surfaces, not suitable for metal surfaces over 1mm.
2. Packing Information: 1pcs Bipolar Bridge Indent Pull Tab, 5pcs Black Pull Tab, 5pcs Blue Indent Pull Tab, 2pcs Glue Shovel (Note: Glue handle and glue not included).
Product Name: Car Dent Repair Tool Set
Type: Body Repair Kit
Material: Metal and Plastic
Color: black, blue
(For dents and dents and home DIY repairs)
Step 1. Clean the dent surface.
Step 2. Put the glue stick on the handle and heat it up, connect the power supply and preheat for 5-10 minutes.
Step 3. Choose the pull glue according to the size of the dent, then put the heated glue on the pull tab, immediately place the pull tab in the center of the dent and hold until it sticks.
Step 4. Let the glue cool for about 5-8 minutes. Cooling time should be less than 10 minutes, slightly shorter in winter.
Step 5. After the glue has cooled, use the golden indenter or bridge puller to align and press the puller to pull up the indentation. Repeat the above steps until the dent disappears.
Step 6. Clean the glue on the car and pull tab with alcohol or hot water after the dent is done.
Packing list:
1 x Bipolar Bridge Dent Puller
5 x Black Puller Tabs
5 x Blue Dent Puller Tabs
2 x Glue Shovel
Note:
1. Due to manual measurement, please allow 1-3cm error. Make sure you don't mind before bidding.
2. Due to the difference of different monitors, the picture may not reflect the actual color of the product. Thanks.
